top of page

T3 / Vanagon Syncro 16": the Wheel-Arch Flares and Their Part Numbers

12 minutes ago
3 min read

The Syncro 16 is the dream of many T3, T25 and Vanagon owners: more ground clearance, bigger wheels, a standard rear diff lock. You spot it instantly by its black wheel-arch flares – and those are exactly the parts that are almost impossible to find today. Here's what makes a Syncro 16 and which part numbers you need.

VW T3 double cab with four-wheel drive and big wheels

Photo: Matti Blume, licensed under CC BY-SA 4.0, via Wikimedia Commons, unmodified.

What is the Syncro 16?

The Syncro 16 was the toughest version of the four-wheel-drive T3 built in Graz. According to auto motor und sport and Auto Bild, only about 2,140 were made. Compared to a regular Syncro it had:

  • 16-inch wheels with bigger tyres (205 R 16) and more ground clearance

  • Larger brakes

  • Reinforced subframe and standard rear differential lock (front lock optional)

  • Wheel-arch flares to cover the wider wheels


How to spot a genuine Syncro 16

  • Flares on all wheel arches, black textured from the factory

  • 16-inch wheels

  • Diff-lock pull knobs in the dashboard

  • Check the papers and M-codes (our own post on that is coming)

Note: many Syncros were converted to 16 inches later. That's no drawback, but it isn't an original Syncro 16.


The six parts and their numbers

A complete set has six flares. For the version with the "A" index, the Volkswagen numbers are:

  • 251 853 717 A and 251 853 718 A

  • 251 853 719 A and 251 853 720 A

  • 251 853 817 A and 251 853 818 A

Odd last digit = left, even = right.


With or without the "A"?

Volkswagen Classic Parts only lists the version without the A today, and states clearly: for 16-inch wheels, not for the Tristar. The "A" parts are a separate version that is only available used or as a remanufactured part; Volkswagen stopped supplying them years ago. Check which version is fitted to your bus before buying – look for a moulded number inside the part or ask the previous owner for invoices.


Why the parts are so expensive

A single genuine part without the A already costs several hundred euros at Volkswagen Classic Parts. A full set of six quickly reaches four figures. Used parts are often cracked or faded.


Our solution

We're working on a complete six-piece set for the T3 / T25 / Vanagon Syncro and Tristar, 1985–1992, made from ABS with a black textured finish. It will be in the MMT3Tuning shop soon. Want to be notified? Get in touch via our contact form.

Popular with T3, T25 and Vanagon owners: our VW T3 side vents for more engine bay airflow, the VW T3 front spoiler kit and the VW T3 rear light blenders.


FAQ

Do the flares fit a Syncro with 14- or 15-inch wheels?

Mechanically yes – the flares bolt to the wheel arches. Whether your wheel/tyre combination needs approval is something to check with your local inspection authority before converting (no legal advice).

Do they fit a two-wheel-drive T3?

The wheel arches are the same, but without wider wheels the flares look empty. They're usually fitted together with bigger wheels.

About the author: Enis Meral is the founder of MMT3Tuning and has been developing MMT3Tuning parts for the VW T3, T25 and Vanagon since 2011.

Comments

Rated 0 out of 5 stars.
No ratings yet

Add a rating
bottom of page